Header
LeftSide RightSide
LeftSide


GreyBox-TL GreyBox-T
GreyBox-L
GreyBox-BL

Logo-Cambridge

> Visit Manufacturers Site


851AFS
851ABS
VideoN
BrochureN EnquireN
851AIS

Azur 851A - Integrated Amplifier
 
Class XD™ amplification designed to eliminate crossover distortion at low signal levels
New balanced volume topology controllable in 1dB steps, giving very fine control, and
  superbly accurate channel balance
Audiophile grade oversize toroidal transformer and substantial extruded heatsink
  allowing 2 x 120 Watts RMS into 8 Ohms or 2 x 200W into 4 ohms.
Separate transformer taps for left and right channels, twin rectifiers and separate
  PSUs for dual mono operation of the left and right power amplifiers
A separate toroidal transformer supplies the preamp making the 851A effectively a
  Pre and Power amp combination in one box
CAP5 protection technology for trouble free operation
Acoustically damped full metal chassis with thick brushed aluminium front panel
Customisable front panel display
Balanced and unbalanced analogue audio inputs for superior connectivity
RS232 controllable
Eco-friendly <0.5W Standby power consumption
Available in black and silver finishes


Power Output
Audio Inputs:
Audio Outputs
Frequency Response
Signal to Noise Ratio:

Input Impedance:




Power amp damping factor:
Max power consumption
Quiescent power consump.:
Standby Power Consump.:
Bass/Treble controls:


Dimensions (H x W x D):
Weight:                            


120W RMS into 8 Ohms
200W RMS into 4 Ohms
2 sets of balanced XLR, 8 further RCA inputs
Preamp output, Record output
10 Hz - 50 kHz +/- 1 dB

> 93 dB (ref 1W/8 Ohm)
Inputs 1 and 2 (balanced) 20 kOhm
Inputs 1-7 unbalanced 20 kOhm
Rec Input 20 kOhm

> 110 at 1 kHz
800W
Active (no signal) 70W
Standby <0.5W
Shelving type
Max bass boost/cut +/- 10 dB at 10 Hz
Max treble boost/cut +/- 7.5 dB at 20 kHz
115 x 430 x 385mm
15.0kg (33lbs)


Divider
651A
651AR
VideoN
BrochureN EnquireN

TOP

Azur 651A - Integrated Amplifier
 
Audiophile grade oversize toroidal transformer and substantial extruded heatsink allowing
  2 x 75 Watts RMS into 8 ohms
USB audio input allowing USB audio streaming from computer
Separate transformer taps for left and right channels, twin rectifiers and separate PSUs
   for dual mono operation of the left and right power amps
ALPs film type ‘black box’ volume pot for superb low level channel balance and
  stereo imaging
CAP5 protection technology to enhance performance at high volumes
Low dissipation polypropylene signal capacitors and custom made electrolytic capacitors
  in critical positions
Acoustically damped full metal chassis with thick brushed aluminium front panel
Front mounted 3.5mm iPod/MP3 player connection
Eco-friendly <1W Standby power consumption
Available in black and silver finishes

Power output:                     75 watts (into 8 ohms)
THD                                  (unweighted)<0.002% @ 1kHz, 80% of rated power
                                          <0.03% 20Hz - 20kHz, 80% of rated power
                                          <0.02% 20Hz - 20kHz @ 10W
Inputs:                                5 x RCA, 1 x USB (type B), 1 x 3.5mm MP3 input
Outputs:                             Speakers A & B, 2 x Rec Out, ’’ headphone out, 1 x pre-out,
                                          1 x subwoofer output
USB input:                          USB audio 1.0, 16-bit 32kHz, 44.1kHz, 48kHz
Frequency response:           (-1dB) 5 Hz – 50kHz
S/N ratio:                            (ref 1W) >92dB (unweighted)
Input impedances:               47k ohms
Max. power consumption:   600W
Standby power consumption <1W @ rated mains
Bass/treble controls Shelving, ultimate boost/cut +/-7.5dB @ 20Hz and 20kHz
Dimensions (H x W x D)    120 x 430 x 350mm (4.7 x 16.9 x 13.8’’)
Weight:                               8.4kg (18.5lbs)


Divider
351A
351AR
VideoN
BrochureN EnquireN

TOP

Azur 351A - Integrated Amplifier
 
The 351A offers a wide range of inputs so you can connect and enhance all your
entertainment devices. Most importantly, we've developed a brand new USB audio
input so you can directly connect your Mac or PC. Best of all, this USB connection is
mated to an onboard Burr Brown DAC (Digital to Analogue Converter) which
automatically pulls a digital audio signal from your computer, bypassing its basic
soundcard and taking care of the delicate digital to analogue conversion process
inside the amplifier. So for the growing fans of iTunes and streaming services like
Spotify, you can connect your computer to the 351A and use it as your primary
audio source with CD quality results!

iPods and MP3 players also get the VIP treatment and can be connected directly to
the front panel via a dedicated 3.5mm jack. In addition, our supplied remote features
iPod command codes enabling control your iPad, iPhone or iPod when connected to
a suitable dock such as those from Cambridge Audio.

Power output:
THD (unweighted):

Inputs:
Outputs:
USB:

Frequency Response:
S/N ratio (ref 1w):
Input Impedance:
Max. power consumption:
Bass/Treble controls:

Weight:
Dimensions (W x H x D):

45W RMS into 8 Ohms
< 0.02% @ 1kHz, 80% of rated power
< 0.15% 20Hz - 20kHz, 80% of rated power
5 x RCA, 1 x USB (type B), 1 x 3.5mm MP3 input
Speakers A & B, 1 x Rec Out, '' headphone out,
USB audio 1.0
16-bit 32kHz, 44.1kHz, 48kHz
5Hz - 50kHz
>92dB (unweighted)
47k Ohms
320W
Shelving, ultimate boost/cut
+/-10dB @ 20Hz and +/-6dB @ 20kHz
6.0Kg (13.2lbs)
430 x 86 x 340mm (3.4 x 16.9 x 13.4'')


Divider
Topaz-AM-10
Topaz-AM-10R
BrochureN EnquireN

TOP

Topaz AM10 premium integrated amplifier
 
True 35 Watts RMS per channel into 8 ohms
Custom low flux toroidal transformer for audiophile performance
Impressive connectivity with 5 rear inputs, 1 Record output and 1 front mounted 3.5mm
   MP3 input
Remote Control which also controls matching CD10 CD player
Built-in MM phono stage
’’ front mounted headphone socket
Detachable IEC mains lead – fully upgradable
New casework design with a brushed aluminium front panel, rigid wrap-over lid assembly
  and carefully designed mechanicals for resonance control, all to improve sound quality
  and aesthetics.

Power Output                     35 watts (into 8 ohms)
Frequency response            (-3dB) 5Hz – 50kHz
THD:                                  (unweighted) <0.01% @ 1kHz, 80% of rated power
                                          <0.15% 20Hz – 20kHz, 80% of rated power
S/N ratio:                            (ref 1W) >82dB (unweighted)
Input Impedances:               47k ohms
Power amp damping factor >50
Max. Power consumption:  260W
Bass/treble controls Shelving, ultimate boost/cut +/- 10dB @ 100Hz and 10kHz
Dimensions (H x W x D)    76 x 430 x 340mm (3.0 x 16.9 x 13.4’’)
Weight                               5.6kg (12.3lbs)

Divider
Logo-Harman

> Visit Manufacturers Site

TOP


HK980F
HK980R
BrochureN EnquireN

HK 980 integrated amplifier
 
Audio section – continuous average power (FTC), (stereo mode): 80 watts per channel
   into 8 ohms @ 20Hz – 20kHz, <0.07% THD, both channels driven; high instantaneous
   current capability (HCC): 80 amps
Dimensions (H x W x D) and weight: 116mm x 440mm x 392mm, 12.7kg
   (Depth measurement includes table stand, knobs, buttons and terminal connections,
   unless stated otherwise; height measurement includes feet and chassis, unless stated otherwise).
80W x 2 into 8 ohms, 20Hz – 20kHz, at <0.07% THD, with all channels driven
   simultaneously
High-current (80 amps), ultrawide-bandwidth (10Hz – 100kHz) amplifier design
   Connectivity
Six stereo analog audio inputs
Two analog recording outputs
One high-quality phono input for connection to record players with an MM cartridge
Stereo preamp outputs to allow for external power amplifiers
 Heavy-duty binding posts to allow for speaker cables up to 10mm
IR remote extension jacks for control of the amplifier when it is placed in a
   cabinet Ease of Use
High-current capability for the instantaneous current necessary to drive and control
   nearly any loudspeaker system precisely
Ultrawide-bandwidth amplifier design for improved transient accuracy and phase linearity
Low negative feedback for further improved dynamic accuracy
Use of discrete electronic circuitry to provide the highest performance level
 Sophisticated electronic protection circuitry to guard the amplifier from short circuits or
   from damaged speakers and wires without impairing sound quality by using currentlimiting
   or output relays
 Dot-matrix display
Tape-monitor loop for recording
Remote A/B speaker switching
Harman Kardon system remote for control of compatible Harman Kardon CD players
   and tuners


Divider
HK990
HK990R
BrochureN EnquireN

TOP

HK 990 integrated amplifier
 
Audio Section – Continuous Average Power (FTC), (stereo mode): 150 watts per channel
8 ohms @ 20Hz – 20kHz, <0.07% THD, both channels driven; High Instantaneous Current
   capability (HCC): 200 amps
Dimensions (H x W x D) and weight: 165mm x 440mm x 435mm, 19.6kg
   (Depth measurement includes knobs, buttons and terminal connections, unless stated
   otherwise; height measurement includes feet and chassis, unless stated otherwise.)
Power
150W x 2 into 8 ohms, 20Hz – 20kHz, at <0.07% THD, with all channels driven
   simultaneously
High-current (200 amps), ultrawide-bandwidth (10Hz – 100kHz) amplifier design
Connectivity
Six analog stereo audio inputs
Two analog recording outputs
Four digital inputs (two optical and two coaxial)
Dual subwoofer outputs to connect up to two active subwoofersπ
One coaxial digital output for recording
Two real balanced inputs, using XLR connectors
One HRS (high-resolution synchronization) link
2.2-channel processor input allows the use of external audio processors
Two high-quality phono inputs for connection of record players with an MM or MC cartridge
2.2-channel preamp outputs allow the use of external power amplifiers
Remote control input and output
Heavy-duty binding posts allow for the use of speaker cables up to 10mmπ π2
Headphone outputπ π
Ease of Use
High-current capability provides the instantaneous current necessary to precisely drive
   and control nearly any loudspeaker system
Ultrawide-bandwidth amplifier design for improved transient accuracy and phase linearity
Low negative feedback for further improved dynamic accuracy
Use of discrete electronic circuitry to provide the highest performance level
Dual-path technology allows for pure analog or pure digital audio processing within the
   same product
EzSet/EQ room optimization for quick and accurate system setup, optimized for two
   channels and two subwoofers
Symmetric (balanced) XLR analog inputs offer lower noise levels and πhigher
   signal-to-noise performance
RLS IV digital-to-analog conversion technology, with dual conversion using two stereo
  AD1955 high-grade DACs
  The HRS link allows Harman Kardon CD players to lock themselves to the external clock
  of the amplifier for a jitter-free connection, similar to having the CD playback inside the
  amplifier.
Dual differential input stages with their own high-voltage supply, resulting πin high gain
   and low noise
Cascoded predriver stage considerably reduces high-frequency distortion, allowing
   crystal-clear high frequencies, free from any harsh sound
   Thermal tracking mechanism using ThermalTrak™ output stage transistors that include
   internal temperature sensors to bias the current of the output stage in real time
   Sophisticated electronic protection circuitry guards the amplifier from short-circuiting or
   from damaged speakers and wires, without impairing sound quality, by using
   current-limiting or output relays
DC servo to ensure that the DC level of the amplifier output will stay within a contained limit
  at any condition
Multiple protection circuits will switch the amplifier off in case overcurrent, overvoltage,
  overtemperature or DC protection is detected
Dual toroidal transformers and up to 16.000μF of supply filtering per channel will allow
  high channel separation and tight bass control, even with a low-impedance load
Dual-line dot-matrix display
Record out available in both digital and analog domains (two analog outputs and one
  coaxial digital output)
Remote A/B speaker switching
IR remote extension jacks for control of the amplifier when placed in a cabinet
Harman Kardon system remote for control of compatible Harman Kardon CD players
  and tuners

GreyBox-B
GreyBox-TR
GreyBox-R
GreyBox-BR
RightSide
Bottom

Copyright & Disclaimer

© Copyright 2012 The Audiophile, a division of Tasman Satellite Services Limited, All rights reserved.
Site Developed by Duke Design.